Efficient overall water splitting over a Mo(IV)-doped Co3O4/NC electrocatalyst

To meet the demand of producing hydrogen at low cost, a molybdenum (Mo)-doped cobalt oxide (Co₃O₄) supported on nitrogen (N)-doped carbon (x%Mo–Co₃O₄/NC, where x% represents Mo/Co molar ratio) is developed as an efficient bifunctional electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). This defect engineering strategy is realized by a facile urea oxidation method in nitrogen atmosphere. Through X-ray diffraction (XRD) refinement and other detailed characterizations, molybdenum ion (Mo⁴⁺) is found to be doped into Co₃O₄ by substituting cobalt ion (Co²⁺) at tetrahedron site, while N is doped into carbon matrix simultaneously. 4%Mo–Co₃O₄/NC is the optimized sample to show the lowest overpotentials of 91 and 276 mV to deliver 10 mA cm^?2 for HER and OER in 1 M potassium hydroxide solution (KOH), respectively. The overall water splitting cell 4%Mo–Co₃O₄/NC||4%Mo–Co₃O₄/NC displays a voltage of 1.62 V to deliver 10 mA cm^?2 in 1 M KOH. The Mo⁴⁺ dopant modulates the electronic structure of active cobalt ion (Co³⁺) and boosts the water dissociation process during HER, while the increased amount of lattice oxygen and formation of pyridinic nitrogen due to Mo doping benefits the OER activity. Besides, the smaller grain size owing to Mo doping leads to higher electrochemically active surface area (ECSA) on 4%Mo–Co₃O₄/NC, resulting in its superior bifunctional catalytic activity.     

Molecular dynamic investigation on sulfur migration during hydrogen production by benzothiophene gasification in supercritical water

Benzothiophene (BT) is a key sulfur-containing intermediate product in the thermal conversion process of coal and heavy oil. The migration process of the sulfur element may affect the thermal utilization design of BT. In this paper, BT was used as a model compound to simulate the supercritical water gasification (SCWG) process by molecular dynamics with a reactive force field (ReaxFF) method, and the laws of hydrogen production and sulfur migration mechanisms were obtained. Increasing the molecule number of supercritical water (SCW) and increasing the reaction temperature can enhance the generation of hydrogen and promote the conversion of organic sulfur to inorganic sulfur. Water was the main source of H₂, and H₂S was the main gaseous sulfur-containing product. SCW had a certain degree of oxidation due to a large number of hydroxyl radicals, which could increase the valence of sulfur. The conversion process of BT in SCW was mainly divided into four stages, including thiophene ring-opening; sulfur separation or carbon chain broke with sulfur retention; carbon chain cleaved, and gas generation. The lumped kinetic parameters of the conversion of sulfur in BT to inorganic sulfur were calculated, and the activation energy was 369.98 kJ/mol, which was much lower than those under pyrolysis conditions. This article aims to clarify the synergistic characteristics of hydrogen production and sulfur migration in the SCWG process of BT from the molecular perspective, which is expected to provide a theoretical basis for pollutant directional removal during hydrogen production by sulfur-containing organic matters in SCW.     

深圳抽水蓄能电站引水系统灌浆质量控制与分析

抽水蓄能电站引水系统灌浆质量控制,决定了水道系统渗水量的大小,关系到电站长期运行的经济指标及水道安全。详细介绍了深圳抽水蓄能电站灌浆参数的设计和灌浆中采取的管理措施与技术措施,分析了灌浆检测成果。电站投入运行以来,引水系统结构稳定,无渗漏。通过总结深圳抽水蓄能电站灌浆过程,对水道引水系统灌浆质量控制提出了几点建议,可供类似工程借鉴。     

Additive manufacturing of bipolar plates for hydrogen production in proton exchange membrane water electrolysis cells

Water electrolysis is a process that can produce hydrogen in a clean way when renewable energy sources are used. This allows managing large renewable surpluses and transferring this energy to other sectors, such as industry or transport. Among the electrolytic technologies to produce hydrogen, proton exchange membrane (PEM) electrolysis is a promising alternative. One of the main components of PEM electrolysis cells are the bipolar plates, which are machined with a series of flow distribution channels, largely responsible for their performance and durability. In this work, AISI 316L stainless steel bipolar plates have been built by additive manufacturing (AM), using laser powder bed fusion (PBF-L) technology. These bipolar plates were subjected to ex-situ corrosion tests and assembled in an electrolysis cell to evaluate the polarization curve. Furthermore, the obtained results were compared with bipolar plates manufactured by conventional machining processes (MEC). The obtained experimental results are very similar for both manufacturing methods. This demonstrates the viability of the PBF-L technology to produce metal bipolar plates for PEM electrolyzers and opens the possibilities to design new and more complex flow distribution channels and to test these designs in initial phases before scaling them to larger surfaces.     

A highly active composite electrocatalyst Ni–Fe–P–Nb2O5/NF for overall water splitting

This work demonstrates a facile Nb₂O₅-decorated electrocatalyst to prepare cost-effective Ni–Fe–P–Nb₂O₅/NF and compared HER & OER performance in alkaline media. The prepared electrocatalyst presented an outstanding electrocatalytic performance towards hydrogen evolution reaction, which required a quite low overpotential of 39.05 mV at the current density of ?10 mA cm^?2 in 1 M KOH electrolyte. Moreover, the Ni–Fe–P–Nb₂O₅/NF catalyst also has excellent oxygen evolution efficiency, which needs only 322 mV to reach the current density of 50 mA cm^?2. Furthermore, its electrocatalytic performance towards overall water splitting worked as both cathode and anode achieved a quite low potential of 1.56 V (10 mA cm^?2).     

Promoted electrocatalytic hydrogen evolution performance by constructing Ni12P5–Ni2P heterointerfaces

Transition metal phosphides (TMPs) have been considered as cheap alternatives of precious metal platinum for electrochemical hydrogen evolution reaction (HER). In the past decades, many reports have indicated that the engineering of heterointerfaces between different components could efficiently enhance the activity of HER catalysts. Here, we report a facile method to construct Ni₁₂P₅–Ni₂P heterostructure by using a low temperature phosphorization strategy. The obtained Ni₁₂P₅–Ni₂P heterostructure shows high activity toward HER with an overpotential value of 166 mV at 10 mA cm^?2 and a Tafel slope of 60 mV dec^?1 in 0.5 M H₂SO₄. Compared with pure Ni₂P and Ni₁₂P₅, the Ni₁₂P₅–Ni₂P heterostructure has more active sites and faster HER kinetics due to the presence of the interfaces between Ni₁₂P₅ and Ni₂P. Furthermore, we used the obtained Ni₁₂P₅–Ni₂P as cathodic catalyst and IrO₂/Ti as anodic material to set up a proton exchange membrane (PEM) electrolyzer which shows good stability after 120 h continuous constant current electrolysis at 200 mA cm^?2. This work demonstrates the positive effect of heterostructure for HER catalysts and provides a feasible strategy for constructing earth-abundant electrocatalysts.     

水产品及养殖水中丁香酚类化合物风险研究

目的 检测水产品及养殖水中丁香酚类化合物。方法 应用食品补充检验方法BJS 201908《水产品及水中丁香酚类化合物的测定》，以海水鱼、淡水鱼、海水虾、淡水虾及养殖水作为基质，测定6种丁香酚类化合物的含量。结果 通过对实际样品测定后发现，在水产品中检出了丁香酚类化合物，主要为丁香酚，检出率为28.9%，其中海水鱼相对突出。结论 本研究为丁香酚作为渔用麻醉剂提供了方法论，为丁香酚类化合物在水产运输的合理使用提供理论依据。     

A machine learning‐based operational control framework for reducing energy consumption of an amine‐based gas sweetening process

This study proposes a data‐driven operational control framework using machine learning‐based predictive modeling with the aim of decreasing the energy consumption of a natural gas sweetening process. This multi‐stage framework is composed of the following steps: (a) a clustering algorithm based on Density‐Based Spatial Clustering of Applications with Noise methodology is implemented to characterize the sampling space of all possible states of the operation and to determine the operational modes of the gas sweetening unit, (b) the lowest steam consumption of each operational mode is selected as a reference for operational control of the gas sweetening process, and (c) a number of high‐accuracy regression models are developed using the Gradient Boosting Machines algorithm for predicting the controlled parameters and output variables. This framework presents an operational control strategy that provides actionable insights about the energy performance of the current operations of the unit and also suggests the potential of energy saving for gas treating plant operators. The ultimate goal is to leverage this data‐driven strategy in order to identify the achievable energy conservation opportunity in such plants. The dataset for this research study consists of 29 817 records that were sampled over the course of 3 years from a gas train in the South Pars Gas Complex. Furthermore, our offline analysis demonstrates that there is a potential of 8% energy saving, equivalent to 5 760 000 Nm³ of natural gas consumption reduction, which can be achieved by mapping the steam consumption states of the unit to the best energy performances predicted by the proposed framework.     

Invited review: Freedom from thirst—Do dairy cows and calves have sufficient access to drinking water?

The importance of drinking water for production and animal welfare is widely recognized, but surveys and animal welfare assessment schemes suggest that many dairy calves and dairy cows do not have sufficient access. Limit milk-fed calves drink more water than calves fed milk ad libitum, but ad libitum milk-fed calves also require access to drinking water, as milk does not meet the animal's requirement for water. At hot ambient temperatures and when calves are sick, access to water is especially important and should be provided at all times. Many young calves do not have access to water throughout 24 h, and whether healthy young calves require free access to water at all times, or from which age, is not clear and requires further study. Dairy cow free water intake (FWI) is largely determined by milk yield, and high-yielding dairy cows may drink up 100 L of water per day. Dry matter, crude protein, and salt content of feed, as well as ambient temperature, have considerable effects on dairy cow water intake. Deprivation of water affects meal patterning for the cow, as well as increased subsequent rate of drinking and compensatory water intake. Although dairy cow ad libitum water intake may exceed the water provision necessary to maintain production, offering water for ad libitum intake may be necessary to safe guard animal welfare. Cattle are suction drinkers that prefer to drink from large open water surfaces, and Holstein dairy cows can drink at a rate of up to 24 L/min. Research on the effect of design and placement of water troughs for indoor-housed dairy cows on their drinking behavior and water intake is limited. Access to a water source at pasture increases the time cows spend there, and access to shade reduces water requirements during periods of warm weather. In both indoor and pastured cattle, there is a lack of knowledge about the effect of stocking of water troughs on competition, drinking behavior, and intake in dairy cows. Studies on the effect of available water trough length and placement, and of the number of cows being able to drink from the same trough of a given dimension, are needed to evaluate current recommendations.